LubeCube
Composite Instrument Cleaner & Lubricator
LubeCube® makes your favorite composite sculpting instruments “non-stick”, for easier contouring, smoother finishing, and no “pull-back”. The result is an instrument that glides over the composite surface without friction or “chatter”.
Your orders are filled seamlessly through your preferred dealer.
Get the right product at the right price with the personalized service you trust.
Product Description
LubeCube makes your favorite composite sculpting instruments “non-stick”, for easier contouring, smoother finishing, and no “pull-back”. The result is an instrument that glides over the composite surface without friction or “chatter”. LubeCube helps you create a super-smooth composite surface with ease! Simply peel off the adhesive back, stick it to a surface and slide your instrument tip through the slit. Made in the USA.
- Opaque foam cube with unfilled light-activated resin monomer
- Cleans, conditions and lubricates instruments
- Compatible with all light-activated and dual-cure composites
- No alcohol, silicone, or solvents
- Makes any composite instrument “non-stick”
- Low-cost, single-use and disposable
Order contains 72 LubeCubes
How To's
- Peel backing off bottom of LubeCube.
- Place and/or stick LubeCube in desired location (back of hand, bib, tray etc).
- Insert tip of composite instrument into slit of LubeCube.
- Glide tip of composite instrument back and forth in slit to clean and lubricate.
- Remove composite instrument and begin sculpting the restoration.
- Repeat steps 3 thru 5 as desired until restoration is complete.
- Dispose of used LubeCube.
FAQs
Yes. There is enough lubricant for many swipes.
No. The foam, glue and backing do not have latex.
In the bag, out of the light.
Unfilled, light-activated, Bis-GMA/UDMA resin monomer.
2 years.
No. The foam is a close-cell foam.
No the resin monomer will not dry out unless exposed to light or exceeds the shelf-life.
