GingiTrac MiniMix
Smarter. Faster. And Still No Cleanup or Packing Cord.
GingiTrac™ is a medium-viscosity, vinyl polysiloxane (VPS) gingival retraction paste with 15% ammonium aluminum sulfate (alum) that gently displaces the gingiva from the tooth and stops bleeding. The MiniMix system is more patient friendly and easier to access all areas of the mouth.
Your orders are filled seamlessly through your preferred dealer.
Get the right product at the right price with the personalized service you trust.
Product Description
VPS Gingival Retraction System
GingiTrac is a medium-viscosity, vinyl polysiloxane (VPS) gingival retraction paste with 15% ammonium aluminum sulfate (alum) that gently displaces the gingiva from the tooth and stops bleeding. When used with GingiCap compression caps, the mechanical bite pressure of GingiCap combined with the astringent action of aluminum sulfate works to control bleeding and seepage in just minutes. GingiTrac cleans up easily and completely, without tissue trauma.
GingiTrac is compatible with all impression materials and can be used as the second cord in a 2-cord technique. And GingiTrac serves as its own preview of the final impression so you can be sure of a quality impression every time.
GingiTrac MiniMix: Simple, easy to use system that is more patient friendly and easier to access all areas of the mouth.
- Works gently, no tissue trauma or damage, and no need for cord
- Contains ammonium aluminum sulfate astringent to control bleeding and oozing
- Minimum set time of 2 minutes
- Removes cleanly in one piece, no need to rinse off
- Gives a preview of the final impression
- Made in the USA
GingiTrac MiniMix Starter Kit contains:
24 Cartridges, 24 Mixing Nozzles, 20 Regular-sized GingiCaps, 20 Large-sized GingiCaps, 1 Snub-Nose Snap-Fit Gun
GingiTrac MiniMix Refill Kit contains:
48 Cartridges, 48 Mixing nozzles, 40 Regular-sized GingiCaps, 40 Large-sized GingiCaps
How To's
- Prepare the tooth as normal.
- If excessive bleeding, use a hemostatic/astringent agent.
- Select appropriate size GingiCap
- Attach the mixing nozzle to the GingiTrac Retraction MiniMix.
- Load MiniMix into Snub Nose Snap-Fit Syringe
- Express a “pea-sized” amount and discard. This is to ensure that the catalyst and base are being mixed thoroughly.
- Fill the GingiCap with GingiTrac Retraction material. Do not allow filled GingiCap to remain at room temperature for more than 1 minute 30 seconds, otherwise material will harden.
- Syringe the GingiTrac Retraction material directly around the tooth preparations’ margin using the included dispensing tip.
- Remove the set GingiTrac. Place the filled GingiCap over the preparation.
- Have patient close with firm but not excessive pressure. Wait 2 minutes, depending on the amount of bleeding or oozing, for complete set and retraction.
- Remove the set GingiTrac. Check for complete retraction. If needed, repeat steps 7-10.
- If necessary, gently rinse and dry the prepared teeth. You are now ready to take your standard impression.
FAQs
Using the bite pressure of the patient, GingiTrac pushes on the gingival trough. Like retraction cord, this constant pressure over time stretches the tissue away from the tooth prep. Unlike retraction cord, which needs to be forced in with a packing instrument, GingiTrac uses a combination of bite pressure plus astringency over time.
No. Unlike cord which contains fibers to which the coagulum can attach, GingiTrac is silicone, and does not provide a surface for attachment.
The black fibers in GingiTrac are for a visual reference only, so as to differentiate the material from impression materials. They are rayon cut fibers. The fibers are not metal.
GingiTrac has a slight mint taste and smell.
Silicone material like Matrix and GingiTrac are sensitive to latex and rubber. We recommend using vinyl gloves when handling this two materials.
Additionally, the GingiTrac material may not mix correctly when first expressed from a cartridge. The base [green] material is much more viscose then the catalyst [white] material. We recommend expressing a “pea- size” amount from the cartridge WITH nozzle off to the side, before dispensing the material around the prep or into the matrix.
No. The rebound effect of flexible silicone materials will cause any die poured from this impression to be too small. The resulting crown will not fit. The only way to compensate for this is to use several coats of die spacer on the lab die. We do not recommend using the GingiTrac impression as your final impression. Your lab will not like it.
Alum is known to have an astringent and reinforcing effect on proteins. The compound causes superficially damaged and dead cells to be combined and shed. This leads to a reduction in local blood and fluid circulation.
No. When polymerized GingiTrac is removed from the mouth, nothing is left behind. A slight rinsing and drying of the impression site will insure consistent results.
Yes. Centrix has not tested any other fast bite materials with GingiTrac so we do not guarantee the same results. But most fast bite VPS are the same.
We recommend storing in a cool, dry place (5-25°C / 41-77°F). And we recommend leaving the mixing nozzles on cartridges until next use for the 50ml cartridges.
No, GingiTrac has sulfates in its formula. Sulfates do not distort impression materials. Sulfur or Free Sulfur [which some gloves contain] will distort impression materials. These two materials do not share the same chemistry.
Product Downloads
Schedule a CE Lunch & Learn.
Enhance your product skills with our expert-led sessions. Lunch included!
Discover Your New Favorites,
See What Other Dental Practices Love:
$99.99
Let's Find What You're Looking For
GingiTrac is a very clean way of getting a good margin around your crowns
- Dr. Patricia Calabria (Colleyville, Texas)
